【Introduction】:
Parameter:
Heating -zones | 8 heating-zones,16 heating, 4 cooling |
Heating length | 2950mm |
controlling area | room temperature to 360℃ |
Controlling accuracy | ±1℃ |
difference in temperature | ±2℃ |
cooling way | compulsion cooling air(can choose water cooling) |
PCB size | 50-400mm |
PCB transportation height | 900±20mm |
transportation way | Chain and net tape to transport |
transportation direction | L-R (can choose R-L) |
transportation speed | 0-2000mm/min |
Chain’s wide range | 70-500mm |
net tape width | 520mm |
power off protection | Ups for Conveyor & PC |
power supply | AC三相 380V 50Hz |
normal/start power | 8.5/33kw |
mm dimension | 5500L*1500W*1600H |
net Weight | 2200kg |
Nitrogen protection | can choose configuration |
O2 density | - |
cost of Nitrogen | - |
A系列主要部件配置清单:A Mainly configuration listing
controlling system | SIEMENS CPV,SIMA temperature controlling panel.(Also can choose the Torch researched ) |
software | researched by Torch |
computer | IPC or 15 inch LED screen. |
without-electricity switch | French Schneider |
solid-state relay | CARLO GAVAAZZI |
intermediate relay | Japanese Omron |
fuse? | French Schneider |
single without-electricity operates | French Schneider |
transportation motor | PANASONIC |
circulation? motor | Taiwan Sanyue |
heater | LONG SHENQ ELECTRONIC,shelf life is 100 thousand hours. |
transportation motor | ?PANASONIC |
UPS | Taiwan APCUPS |
transducer | Taiwan Motor |
wire | high temperature international standard wire |
temperature test sense organ and connector | OMEGA USA OMEGA |
photoelectricity switch | YAMATAKE |
Guideway adjusted motor | PANASONIC |
A series specialty:
The mainly component is adopted international brand one. Temperature can warm up quickly and keep stable, High effective can save Electronic It is adopted in jointing the BGA and CSP component.
Special oven inner design has a heat insulation system, The electronic cost is the lowest of this filed. (A common one will cost 15KW/Hour.Our A8 just 8.5W/Hour).That will save 40%; If the equipment works for 24 hours, that will save 50 thousand CNY per year.
Our own research software system has strong functions and work at a stable situation. It is to be said the best software in this industrial. The PCB board is supervised, and the result will be analyzed and recorded.
Controlling the room by PID independently, can check the temperature and analysis the data, and then transfer the result to type.
Warm up quickly, from room temperature to work temperature only need 20min。.?
Imported high quality motor which can bear high temperature and high speed. The wind is calm and the sound is small.
The Guideway is made from good aluminum alloy, It has high hardness and can’t transfiguration easily.
When the power off, this machine can still transport PCB board out and can make no damage to it.
The oven inner is stainless to keep the PCB board clear when soldering it.
Auto supervision to show the working situation ;
Special wind wheel design to make the wind speed stable.
Pump air cooling system area is wide and the cooling effect is perfect.
Circle water cooling speed is quickly and the tin ball is bright.
Nitrogen content calculator can tell you the flux at any moment.
content is empty!