The selling point of TN series :
1. Chanel reflow oven with the thickness of 150mm
2. Use 24 chanel modular design reflow oven hardware temperature control system .
3. The only industry can achieve custom fuinction reflow oven software system .
4.The only industry have remote control reflow oven software system
5.Equipped with top brand HP OR Lenovo computer,such as optional industy computer according to customer requirment .
Product instruction of TN360C:
Main features for TN360C:
1> Intuitional welding control: TN360C adopts advanced furnace temperature collection system. It can test temperature curve and temperature in furnace hearth. The temperature curve can be recorded or printed at the same time.
2> Smooth and safe transmission system: Drive system adopts a high quality conversion motor and conversion system .It also has a closed-loop governor and Turbine speed reducing box of 1:100 to keep running smoothly .Speed:01600mm/min.
3> Stable and safe electric control system: Delay switch protection. After power off, temperature drops evenly so that can prevent damage to transmission component and heater.
4> Upper and lower heating zones are separately controlled. The circulation speed can also adjust separately. It is suitable for welding different PCB plates and components.
Model | TN360C |
Heating part parameter | |
Heating zone | 6 heating zones(6 upper,6 cover)+1 cooling zone |
Heating method | Full forced Hot air heating |
Heating area length | 1800mm |
Cooling zone | 1 zone, (1up/1 below) |
Cooling method | transverse flow vortex centrifuge blower |
Built-in automatic relay heating system | To prevent over-pressure damage controller or motor when start up and to prevent component damage when welding. |
Transmission parameter | |
PCB Board width | ≤ 300mm |
PCB conveyor Height | 900±20mm |
conveyor direction | L→R |
Conveyor Material | Stainless steel |
Chain-driven Mesh belt conveyor | Net belt and chain-driven transmission |
Mesh belt width | 300mm |
Conveyor speed | 0-1600mm/min adjustable |
Control part parameter | |
Power supply | 380V (3 ph, 4 wires) 50/60Hz |
Max Power | 34kw |
Normal working power | 19KW |
Warm-up time | ≤ 30min |
Control system | PLC+ Torch module temp control system+ IPC |
Range of temperature control | Room Temperature-360 ℃ |
Temperature control | Advanced Intelligent micro computer PID temperature control automatically in each zone + SSR non-contact output |
Precision of temperature control | ± 2℃ |
Temperature distributing error | ± 2℃ |
Machine Body Parameter | |
Net Weight | 680 kg |
Dimension( L×W×H )(mm) | (2900×900×1300mm) |
content is empty!