Automatic soldering TB780D

A function of flux spray device 1 nozzle: import nozzle, better spray 2 air system: AIRTAC electromagnetism valve, anti-corrosive pipe 3 moving nozzle system: air cylinder driven, spray speed and spray width can be adjusted by handle. 4 filtration flux system: collecting device is made of multi collecting lay, it is convenient to clean. 5 flux controlling: anti-corrosive controlling flux and display flux.

 

 Features and function:

 Flux spray system
 A function of flux spray device
 1 nozzle: import nozzle, better spray
 2 air system: AIRTAC electromagnetism valve, anti-corrosive pipe
 3 moving nozzle system: air cylinder driven, spray speed and spray width can be adjusted by handle.
 4 filtration flux system: collecting device is made of multi collecting lay, it is convenient to clean.
 5 flux controlling: anti-corrosive controlling flux and display flux.
 B function of flux foam device
 With foam function, inner foam pump, it don’t need outer air supply, it is convenient to spray flux.
 1 preheating temperature range: room temperature—260℃
 2 controlling way: with PID controlling to make welding process.
 3 Heat: infrared heating, temperature uniformity, rapid speed, PID supply heat.
 4 Preheating security: surface temperature is lower than fire point of flux.
 5 Preheat: it can meet preheating need of batch PCB welding, uniformity temperature, small temperature differences of PCB.
 Welding system features:
 1 Material: 316 stainless steel
 2 Capacity: 100kg double wave crest capacity
 3 Height range of wave crest: 0—8mm adjustment and keep wave crest balance.
 4 Power consumption (heater): 6kw, uniformity heat, long life. It will take 1 hour to melt tin. This can save 6kw during melting tin and save 3kw during constant temperature.
 5 Unique nozzle: double wave crest design, with unique flat wave which is stable and reduce SMD leaking solder.
 6 Heat controlling system: PID control, accuracy is ±2
 7 Moving tin pot: in and out can be finished by hand.
 8 Motor of wave crest: import motor, running stable.
 9 Tin pipe: screw thread stem
 

 Cooling system
  Cooling motor: unique cooling design, it can achieve import device effect.

 Transmission system
 1 chain: stainless steel chain, anti-corrosive, ametabolic.
 2 rail system: special strong aluminum
 3 speed: 0—1800mm/min
 4  accuracy: motor is from Taiwan, it is easy to adjust and maintain

 Controlling system
 1 buttons on the panel: manual/ automatic control, speed can be set, temperature can be display.
 2 protect short circuit: with short circuit protection, with Sanling air switch protection in main power and tin pot of preheating zone, with fuse power in controlling system.
 3 urgent stop protection: there are 2 urgent stop protection in the machine, please cut off power in urgent condition.
 4 whole machine controlling: relay controlling.
 5 transmission speed: Taiwan motor makes sure stable speed.
 6 wave crest: Taida transducer makes wave crest flatter.
 7 over-current protection: over-current protection with transducer, it will cut off power when current is over to make motor safe.
 8 modularization wiring device: there are main wiring modularization and controlling modularization.

 Technology parameters:

 

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

	Specification	TB780D(double wave crest)
1	solder type	lead / common solder
2	max width of PCB	200mm
3	Components height	Above ≤130mm under ≤8mm
4	Capacity	100KG
5	Preheating length	600mm
6	temperature accuracy	±2
7	spray way	Foam
8	temperature range	room - 300
9	wave height	0—8mm， keep balance wave crest
10	heating controlling	PID
11	speed	0—1800mm/min
12	start power/normal power	12KW/6KW
13	preheating temperature	room—260℃
15	Width adjust	Manual adjusting
16	Transmit angle	3－8
17	Direction	right→left
18	controlling accuracy	Taiwan motor
19	Weight （Kg）	650KG
20	Dimension L x W x H(mm)	1400*1000*1500MM          it is 2100mm when the machine include loading and cooling system.

 

 Remark：

 Technical parameter for TB78：

 

                                                                                                                                                                                                                               

Model	TB780
The max power consumption	7Kw
Soldering tin capability	90Kg
Spray mode of Fluxes	Effervescence/spray
PCB width	200mm
Temperature range	200 -300℃
Conveyer belt speed	0.5 -3m CTV
Preheating temperature	90-110℃
Wave crest rang	5 -12mm
Power supply	380v Three phase and four wires
Dimension	3020×1300×1500 mm