【Main feature】:
1、The plating and drilling machine can plate double-size board, and plating process is very simple.
2、Plating speed can be changed, it can make out thin linear, and plating process can stop when plating.
3、It can continue to plate at stop place and it has area plating function, which can make up some situations that copper was not plate well due to some reason.
【Introduction】：
PCB plate making machine PCB2400 can make single and double PCB automatically, quickly, and precision according to the design of the PCB ,which designed by software(Protel, Orcad,PADS). Customer finish the design of PCB and produce the required file ,then transmit this file to the PCB machine through RS-232 ,and then the PCB machine will finish the whole PCB plate making process, like drill ,engrave and cut .
Limitless software upgrade, good physical hole plate equipment ,make automatic PCB plate making is more simple and lower cost, higher effective. This mode is high precision , easy to operate ,especially for Electronics, computer ,control and meter major for testing in university , Electronics enterprise development, Scientific research institute and military .
【The main feature】:
1. Drill on copper board.
2. Control cutting depth mill, get rid of unnecessary copper, come into lead pad.
3. Mill, using cut from shape line to separate PCB and plates.
4. Set the original point directly, has re-position function.
5. Software suppositional process which can preview process path.
6. Real time process path and schedule on show.
7. Multi-hole drill finished for once, avoid cutter replacing frequently.
8. Continue drilling at stop area, it can stop and re drill in any place.
9. Drill combination, using two cutters which can short process time.
10. Choose to drill in any area, it can satisfy with mending drill and precision drill.
11. Adjusting high rotate speed motor, the highest speed is up 60000rpm.
12. Intelligent rotate controlling, optimize motor speed according to cutter.
【Specification and technical parameter】：
Max size of PCB: 300*300mm
PCB: suit for single and double sides of PCB
method：X、Y、Z axis step motor
Max rotating speed：60000 rpm
Max moving speed：2.4 m/min
Min line diameter：6 mil
Min line distance：10 mil
Manufacture speed：20mm/s
Drilling depth：0.02～3mm
Drilling hole diameter：0.4～3.175mm
Drilling speed：100 Strokes/min （Max）
Communication interface：RS232
Memory：256M above
Computer system：CPU：PⅢ-500MHz above；
Operation system：WindowsXP/Vista
Power supply：AC(220±22)V，(50±1)Hz
Power：180 VA
Weight：70kg
Dimension 0.55*0.68*0.45 m
Company Name:Beijing Torch Co.,Ltd 
