Plate making machine PCB2300

Introduction

1. Drilling in the copper board
2. Control the depth of milling, strip unnecessary copper to form wire pad
3. Directly set and reset origin
4. Virtual processing software, preview the processing path
5. Display the real process
6. Multi-holes at once, save the need for frequent tool change process
7. Resume drilling, stop and restart at any position
8. Combination of drilling, set two knives ,shorten process time to max degree
9. Select any region to drilling to meet high precision
10. Intelligent control the speed, optimize the speed according to tool

Advantages

1. It is available for both sides and easy to operate
2. The speed can be changed ,you carve minimum line and stop when process
3. The re-drilling and region-drilling function, to make up some cases than the copper is not carved through.
4. 5 position holes, more accurate position
5. Adjust Z axis when process to avoid can’t drill because the PCB is not level
6. Milling PCB function. Mill the PCB to keep the PCB level after repeated drilling and carving. Moreover, you can move the holes in the board to position the double-side board.
7. The test carved function to ensure the copper will drilled well to the great degree.
8. To drill the arc edges

Parameter